Talamex Bruce Anchor / M Anchor Galvanized 10kg

Talamex Bruce anchor / M anchor, galvanized, 10kg
Weight kg: 10
A mm: 288
B mm: 540
C mm: 377

Hot-dip galvanized steel
Precision-cast in one piece

The M anchor / Bruce anchor is relatively uncommon. Originally designed for drilling rigs, it is characterized by high tensile strength. The Bruce anchor can be problematic if the vessel swings around the anchor. Another disadvantage is that the anchor is somewhat bulky due to its large flukes.

Under load, this anchor virtually plows itself into the seabed. This requires the correct bottom, such as sand or mud. Its holding power is then very high.